Finite Volume Method — FVM CFD Solver
Finite-volume CFD with SIMPLE pressure–velocity coupling, upwind and MUSCL/WENO schemes, thermal boundary conditions and Roe/HLLC Riemann solvers. Runs in your browser, no install.
The finite volume method (FVM) discretises the governing equations over control volumes and enforces conservation by construction: whatever flux leaves one cell enters its neighbour. That local-conservation property is why FVM, not finite difference, is the default in almost every industrial CFD code.
Incompressible flow couples pressure and velocity through continuity, and you cannot update both from the previous iterate without either diverging or requiring iteration. SIMPLE — the Semi-Implicit Method for Pressure-Linked Equations — resolves this by updating the pressure field with a Poisson-like equation, forming a pressure-velocity correction, and repeating until the residuals fall. CFD Lab implements that path together with upwind and MUSCL/WENO reconstruction for convection.
The compressible branch uses approximate Riemann solvers (Roe and HLLC) with WENO reconstruction for shock capture, which is what makes transonic airfoils and supersonic wedges tractable in a browser tab. Thermal and conjugate boundary conditions are available for the coupled heat-transfer problems — electronics cooling being the canonical example in the tutorial set.
Honesty about scope: the 3D FVM path is the newer of the two solver families and carries an MVP maturity badge in the Capabilities panel. Where a result is not yet validated, the UI says so rather than implying a confidence the numbers do not support.
Frequently asked questions
What does SIMPLE stand for?
Semi-Implicit Method for Pressure-Linked Equations. It is the standard iterative pressure–velocity coupling scheme for incompressible flow, updating the pressure field and a velocity correction until continuity is satisfied to within tolerance.
Why use WENO reconstruction?
Central differencing is accurate in smooth flow but oscillates violently across a shock. WENO reconstructs a weighted combination of stencils using smoothness indicators, which stays stable at a discontinuity without the smearing that a simple upwind scheme produces.
When should I choose FVM over LBM?
Choose FVM for compressible flow, for conjugate heat transfer, and where boundary conditions are complex. Choose LBM for incompressible flow with complex geometry, where its staircased boundaries and robustness are an advantage rather than a limitation.
Try it now
The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.
Open CFD Lab Back to home