CFD Validation — Benchmark Cases & Published Results
See the numbers. CFD Lab runs canonical benchmark cases — cavity, step, NACA 0012, Ahmed body, Schlichting plate — and reports measured error against published references.
A CFD result without verification is an opinion. CFD Lab's validation module runs canonical cases with known published solutions and reports the actual error, so you can see what the solver does rather than take a claim on trust.
The catalogue spans the standard set: the lid-driven cavity against Ghia et al. (1982) centreline velocities at Re=100 and Re=400, cylinder wakes against Tritton and Williamson, the backward-facing step against Armaly et al. (1983), Blasius and Schlichting flat plates, Poiseuille, Couette and Taylor-Green analytical solutions, low-Reynolds NACA 0012 sections, and the Ahmed body. Each case declares its own tolerance, and a case outside it is reported as a failure or warning, not quietly dropped.
Grid convergence is handled the way it should be: the Grid Convergence Index, a Richardson-extrapolation estimate of discretisation error computed across three grid levels, so the reported number carries an uncertainty rather than a false precision. A GCI tells you whether you have actually converged, which is a different and more useful question than whether the residual has stopped falling.
The table below is generated at build time from the committed validation-report.json, the same file the in-app Validation module reads, so this page cannot quote better numbers than the solver produced. It includes the cases that currently fail (the low-Reynolds NACA 0012 sections) or carry warnings, and the higher-Reynolds cavity cases that were skipped in that run.
Latest recorded results
From the validation run recorded on 2026-11-12 at commit d8e6456e: 35 cases, 30 passed, 1 failed, 4 with warnings and 0 skipped. The error column is the relative L2 error against the published reference profile; the tolerance is the acceptance threshold for that case. Failing and skipped cases are listed on purpose, because a validation page that only shows passes tells you nothing.
| Case | Reference | Solver | Status | L2 error | Tolerance |
|---|---|---|---|---|---|
| Ghia Cavity Re=100 | Ghia et al. (1982) | LBM | PASS | 3.3e-3 | 0.050 |
| Ghia Cavity Re=400 | Ghia et al. (1982) | LBM | PASS | 0.015 | 0.050 |
| Ghia Cavity Re=1000 | Ghia et al. (1982) | LBM | PASS | 9.1e-3 | 0.025 |
| Tritton Cylinder Re=20 | Tritton (1959) | LBM | PASS | 0.035 | 0.100 |
| Tritton Cylinder Re=40 | Tritton (1959) | LBM | PASS | 0.020 | 0.050 |
| Tritton Cylinder Re=100 | Tritton (1959) | LBM | PASS | 0.053 | 0.070 |
| Poiseuille Flow | Analytical Solution | FVM | PASS | 0.013 | 0.020 |
| Blasius Flat Plate | Blasius (1908) | LBM | PASS | 6.7e-3 | 0.010 |
| Schlichting Flat Plate (k-ω SST) | Schlichting (1979) | KOMEGA | PASS | 0.148 | 0.300 |
| Ghia Cavity Re=5000 | Ghia et al. (1982) | LBM | PASS | 0.033 | 0.080 |
| Tritton Cylinder Re=200 | Tritton (1959) | LBM | PASS | 0.107 | 0.150 |
| Square Cylinder Re=40 (steady drag) | Breuer et al. (2000); Dhiman et al. (2005) | LBM | PASS | 0.119 | 0.150 |
| Square Cylinder Re=100 (vortex shedding) | Sohankar, Norberg & Davidson (1998), Table II Case 3 | LBM | PASS | 0.080 | 0.150 |
| Backward-Facing Step | Armaly et al. (1983) | LBM | WARNING | 0.164 | 0.200 |
| Backward-Facing Step, closed channel (Re 400) | Katsoudas et al. (2025) arXiv:2507.16509, Table 1 | LBM | PASS | 8.4e-3 | 0.050 |
| Taylor-Green Vortex | Taylor & Green (1937) | LBM | PASS | 1.7e-3 | 0.030 |
| Couette Flow | Schlichting (Boundary Layer Theory) | LBM | PASS | 4.8e-3 | 0.020 |
| Von Kármán Vortex Street Re=100 | Williamson (1988) | LBM | PASS | 4.7e-3 | 0.020 |
| NACA 0012 Airfoil Re=5000 α=0° | Swanson & Langer (2016) NASA/TM-2016-219003, laminar NACA 0012 Case 1 (M=0.5, α=0°, Re=5000), CD=0.05565 | LBM | FAIL | 0.193 | 0.020 |
| NACA 0012 Airfoil Re=5000 α=5° | Gupta et al. (2023) J. Fluid Mech. 954, A26, doi:10.1017/jfm.2022.958, Fig. 18(d) Re=5000 α=5° 2-D spectral-element Cl=0.206 (digitised) | LBM | PASS | 0.031 | 0.070 |
| Ghia Cavity Re=10000 | Ghia et al. (1982) | LBM | PASS | 0.065 | 0.180 |
| Hagen-Poiseuille Pipe Flow | Hagen (1839), Poiseuille (1840) | LBM | PASS | 0.013 | 0.030 |
| 3D Lid-Driven Cavity Re=400 | Albensoeder & Kuhlmann (2005) | LBM | PASS | 0.012 | 0.050 |
| Rayleigh-Bénard Convection Ra=3·10⁴ | Prasianakis & Karlin (2007) Phys. Rev. E 76, 016702 (Nu=3.605, Ra=3·10⁴, Pr=0.71, L/H=2); Clever & Busse (1974) J. Fluid Mech. 65, 625 | LBM | PASS | 0.042 | 0.140 |
| Turek 2D-1 Steady | Schäfer & Turek (1996) | LBM | PASS | 0.013 | 0.050 |
| Kelvin-Helmholtz Instability | Drazin & Reid (1981) | LBM | PASS | 0.190 | 0.250 |
| Plane Jet Re=500 | Schlichting (1933) | LBM | PASS | 0.418 | 0.550 |
| Ahmed Body 25° Re=2.78M | Ahmed & Raitby (1984); Lienhart & Becker (2000) | FVM | WARNING | 10.387 | 0.300 |
| Natural Convection Ra=10⁵ | de Vahl Davis (1983) Int. J. Numer. Meth. Fluids 3:249-264, Nu_avg = 4.519 at Ra=1e5 | CHT | PASS | 0.035 | 0.120 |
| Risø R-1280 Wind Turbine | Risø National Laboratory (2001) Risø-R-1280 | BEM | PASS | 0.076 | 0.300 |
| FDA Nozzle Benchmark | FDA (2014) "CFD in Medical Devices" benchmark standard | FVM | WARNING | 4.3e-4 | 0.300 |
| Schlichting Flat Plate (k-ε RANS) | Schlichting (1979) Boundary Layer Theory, Table 12.1 | FVM | PASS | 0.026 | 0.300 |
| Normal Shock M1=2 (Rankine-Hugoniot) | Anderson (2003) Modern Compressible Flow Ch. 3; NACA Report 1135 / Anderson App. A.2 normal-shock table (M1 = 2.00) | ANALYTICAL | PASS | — | — |
| Holtrop-Mennen Trawler Resistance | Holtrop & Mennen (1984); ITTC 1978 friction line | ANALYTICAL | WARNING | — | — |
| Womersley Pulsatile Channel Flow (α = 4, analytical) | Womersley (1955) J. Physiol. 127:553 — exact oscillatory viscous flow; plane-channel form per Loudon & Tordesillas (1998) Int. J. Numer. Meth. Fluids 27:1001. | LBM | PASS | 0.012 | 0.020 |
Frequently asked questions
What is a Grid Convergence Index?
A formal estimate of discretisation error derived by Richardson extrapolation across a sequence of refined grids, with an uncertainty factor reflecting the order of convergence. It answers "how much of my error is numerical?" rather than "has the residual stopped falling?"
Which benchmarks does CFD Lab run?
Lid-driven cavity, cylinder wakes, backward-facing step, Blasius and Schlichting flat plates, channel and pipe flow, Taylor-Green vortex, Rayleigh-Bénard convection, NACA 0012, Ahmed body and a normal shock, among others. The results table on this page lists every case with its measured error, tolerance and status.
Try it now
The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.
Open CFD Lab Back to home