CFD Glossary — Computational Fluid Dynamics Terms
Plain-English definitions of CFD terms: LBM, FVM, SIMPLE, CFL, k-ω SST, Grid Convergence Index, Mach number, drag coefficient and more. Searchable CFD glossary.
CFD has a vocabulary problem. Terms are often defined in terms of other terms, so a beginner reads "the residual measures the discretisation error" and learns nothing. These definitions are written to be read on their own, in plain engineering English, with the governing relation given where one exists.
The glossary is grouped into general concepts, lattice Boltzmann, finite volume, turbulence and boundary conditions, and it is searchable in the Learning Centre inside the app — the same data that renders this page, so the two never disagree.
Glossary
- CFDComputational Fluid Dynamics — numerical analysis of fluid flows using computers to solve the governing equations.
- Reynolds Number (Re)Dimensionless ratio of inertial to viscous forces: Re = UL/v. Determines flow regime (laminar vs. turbulent).
- Navier-Stokes EquationsFundamental PDEs governing viscous fluid motion, expressing conservation of momentum and mass.
- Lattice Boltzmann Method (LBM)Mesoscopic simulation method using particle distribution functions on a discrete lattice to recover fluid dynamics.
- D2Q92D lattice with 9 velocity directions. Standard lattice for 2D incompressible LBM simulations.
- D3Q193D lattice with 19 velocity directions. Common for 3D LBM with good balance of accuracy and performance.
- Distribution Function (f)Probability of finding a particle at a given position with a given velocity at a given time.
- Equilibrium Distribution (f_eq)Maxwell-Boltzmann distribution discretized on the lattice. The target state for relaxation.
- BGK Collision OperatorBhatnagar-Gross-Krook single-relaxation-time collision model: Omega_i = -(f_i - f_eq_i) / tau.
- Relaxation Time (tau)Controls the rate of approach to equilibrium. Related to kinematic viscosity: v = cs^2 * (tau - 0.5).
- MLUPSMillion Lattice Updates Per Second — standard performance metric for LBM solvers.
- Zou-He BoundaryNon-equilibrium bounce-back scheme for velocity/pressure boundary conditions in LBM.
- Bounce-BackSimple boundary condition where distributions hitting a wall are reflected back, enforcing no-slip.
- Finite Volume Method (FVM)Discretization method that integrates conservation laws over control volumes, ensuring strict conservation.
- SIMPLE AlgorithmSemi-Implicit Method for Pressure-Linked Equations. Iterative pressure-velocity coupling scheme.
- Pressure-Velocity CouplingChallenge in incompressible flows: pressure and velocity are coupled and must be solved simultaneously or iteratively.
- Control VolumeSmall region of space over which conservation equations are integrated in FVM.
- Upwind SchemeDiscretization scheme that uses information from the upstream direction, improving stability for convection.
- CFL NumberCourant-Friedrichs-Lewy number: CFL = u*dt/dx. Must be <= 1 for explicit time-stepping stability.
- TurbulenceChaotic, multi-scale flow regime at high Re. Characterized by vortices, mixing, and increased energy dissipation.
- Laminar FlowSmooth, orderly fluid motion in parallel layers with no mixing between them. Occurs at low Re.
- Smagorinsky ModelSub-grid scale (SGS) model for Large Eddy Simulation. Models unresolved turbulent scales.
- k-epsilon ModelTwo-equation RANS turbulence model solving transport equations for turbulent kinetic energy (k) and dissipation rate (epsilon).
- Boundary LayerThin region near a solid surface where viscous effects are significant and velocity transitions from zero to free-stream.
- Drag Coefficient (Cd)Dimensionless force coefficient for drag: Cd = Fd / (0.5 * rho * U^2 * A).
- Lift Coefficient (Cl)Dimensionless force coefficient for lift: Cl = Fl / (0.5 * rho * U^2 * A).
- No-Slip ConditionFluid velocity at a solid boundary equals the wall velocity (typically zero). Fundamental BC in viscous flows.
- Grid Convergence Index (GCI)Quantitative measure of numerical discretization error using Richardson extrapolation on multiple grid levels.
- Mach NumberRatio of flow velocity to speed of sound: Ma = U/a. LBM typically requires Ma < 0.3 (incompressible limit).
- VorticityCurl of the velocity field. Measures local rotation in the fluid: omega = curl(u).
- ResidualMeasure of how well the current solution satisfies the discretized equations. Should decrease during convergence.
- Stokes FlowCreeping flow at very low Re where inertial forces are negligible compared to viscous forces.
- RANSReynolds-Averaged Navier-Stokes — time-averaged turbulence modeling approach. Most practical for engineering.
- LESLarge Eddy Simulation — resolves large turbulent eddies, models small ones. Between DNS and RANS in cost.
- DNSDirect Numerical Simulation — resolves all turbulent scales without modeling. Extremely expensive, limited to low Re.
- Wall FunctionEmpirical model bridging the viscous sub-layer near walls, avoiding the need for very fine near-wall meshes in RANS.
- y+ (Wall Distance)Dimensionless wall-normal distance: y+ = u_tau * y / v. Determines adequacy of near-wall mesh resolution.
- Structured MeshGrid with regular connectivity (quad/hex elements). Efficient memory layout and often higher accuracy for aligned flows.
- Unstructured MeshGrid with irregular connectivity (tri/tet elements). Flexible for complex geometries but more memory per cell.
- Mesh RefinementIncreasing local cell density in regions of interest (e.g., boundary layers, wakes) to improve solution accuracy.
- Courant NumberRatio of physical distance traveled by a wave to the grid spacing in one time step. Key stability criterion.
- ConvergenceThe process by which iterative solution residuals decrease to an acceptable tolerance, indicating a stable solution.
- Under-RelaxationDamping technique that blends old and new iterative solutions to stabilize convergence: phi_new = alpha*phi_calc + (1-alpha)*phi_old.
- Pressure Coefficient (Cp)Dimensionless pressure: Cp = (p - p_inf) / (0.5 * rho * U^2). Used to characterize surface pressure distributions.
- SeparationPhenomenon where the boundary layer detaches from a surface due to adverse pressure gradient, forming a recirculation zone.
- WakeDisturbed flow region downstream of a body characterized by reduced velocity, increased turbulence, and vortex shedding.
- Strouhal Number (St)Dimensionless frequency of vortex shedding: St = f*L/U. For a cylinder, St ≈ 0.2 over a wide Re range.
- Incompressible FlowFlow where density variations are negligible (Ma < 0.3). Simplifies governing equations significantly.
- Compressible FlowFlow where density changes are significant (Ma > 0.3). Requires energy equation and equation of state.
- MRT (Multi-Relaxation Time)LBM collision operator using multiple relaxation rates in moment space. More stable than BGK for complex flows.
- Entropic LBMLattice Boltzmann variant enforcing the discrete H-theorem for unconditional stability at high Re.
- Immersed Boundary MethodTechnique to represent solid boundaries on a non-body-conforming grid using body force terms.
- Gauss-Seidel MethodIterative linear solver that updates each variable using the latest available values. Common in pressure solvers.
- Multigrid MethodAcceleration technique using hierarchy of grids to efficiently eliminate errors at all wavelengths.
- Peclet Number (Pe)Ratio of convective to diffusive transport: Pe = U*L/D. Determines dominance of advection vs. diffusion.
Frequently asked questions
What is the CFL number?
The Courant–Friedrichs–Lewy number, CFL = u·dt/dx. It is the fraction of a cell a fluid parcel travels per timestep and must stay at or below 1 for explicit schemes. It is the first thing to check when an explicit solver goes unstable.
Try it now
The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.
Open CFD Lab Back to home