Medical CFD — Blood Flow & Hemodynamics

Cardiovascular CFD in your browser: blood rheology models, Windkessel boundary conditions, virtual fractional flow reserve and flow visualisation for device design.

Cardiovascular flow is not a constant-viscosity Newtonian problem. Blood is a shear-thinning suspension of red cells in plasma, and at large vessels the apparent viscosity drops sharply with shear rate. A Newtonian model at a nominal 3.5 mPa·s will be wrong in exactly the small vessels where device designers care most.

CFD Lab implements the non-Newtonian rheology used in this setting — the Casson and Carre models for blood, applied per-vessel — so the viscosity follows the local shear rate rather than being fixed. The inlet and outlet boundary condition is the other half of the problem, and a Windkessel network representing the systemic and pulmonary circulation gives the solver the right impedance instead of an arbitrary pressure.

Virtual fractional flow reserve (vFFR) is the clinical quantity this makes possible: the pressure drop across a stenosis normalised by the pressure drop across the whole vessel, computed from the flow solution. It is what informs whether a lesion is functionally significant, and getting it right depends on both the rheology and the boundary conditions being right.

This is a research and device-design tool, not a clinical one, and CFD Lab does not present it as a diagnostic instrument. The modelling assumptions are exposed so a reader can judge them, and the intended use is comparative design study — how geometry change moves a number — rather than patient-specific prediction.

Frequently asked questions

Why is blood modelled as non-Newtonian?

Blood is a shear-thinning fluid: its apparent viscosity falls as shear rate rises. Over the several-orders-of-magnitude diameter range of the circulation, a single constant viscosity is a poor approximation, and the error concentrates in the small vessels that matter for device design.

What is a Windkessel boundary condition?

An equivalent lumped circuit — resistors and capacitors representing the resistance and compliance of the arterial tree — imposed at an inlet or outlet. It gives the CFD solver a physiologically meaningful impedance rather than an arbitrary fixed pressure.

Try it now

The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.

Open CFD Lab Back to home