Pipe Flow & Heat Transfer Calculator Online — Nusselt
Simulate heated pipe flow in the browser: wall heat-flux segments, bulk and wall temperature, heat transfer coefficient and Nusselt number checked against Gnielinski.
Internal flow in a heated pipe is the classic heat-transfer problem: fluid enters at one temperature, the wall adds heat, and the question is how hot the wall gets and how effectively the heat is carried away. The Pipe Thermal studio solves it as an axisymmetric flow-and-energy problem rather than plugging numbers into a single correlation, so you can see how the temperature field and the heat transfer coefficient develop along the pipe.
You set the diameter and length, the inlet temperature and velocity, and one or more wall heat-flux segments. The fluid can be water or an Al2O3 nanofluid with a chosen particle volume fraction, and the solver couples the turbulence model to the thermal field, switching between laminar and turbulent treatment around a Reynolds number of 2300.
The outputs are the ones a thermal engineer reads first: bulk and wall temperature along the axis, the local heat transfer coefficient h, and the Nusselt number. The computed Nusselt number is shown beside the textbook expectation — the Gnielinski correlation for turbulent flow, or the fully developed laminar value of 4.36 for a constant heat flux — so you can see at a glance whether the run is behaving physically.
The studio is marked as a preview module. It is well suited to teaching internal convection, sanity-checking a hand calculation and screening a coolant before a full 3D conjugate model, but it is an axisymmetric idealisation: bends, fittings, non-circular ducts and conjugate wall conduction need the general CFD pipeline.
Frequently asked questions
What is the Nusselt number?
The ratio of convective to purely conductive heat transfer across the fluid, Nu = hD/k. A higher Nusselt number means the flow carries heat away from the wall more effectively.
Which correlation is used for comparison?
Gnielinski for turbulent flow and the fully developed laminar constant-heat-flux value Nu = 4.36. The comparison is shown next to the computed result rather than replacing it.
Can it model nanofluids?
Yes, an Al2O3–water mixture with a user-set particle volume fraction, using mixture property models. Validate any promising mixture against bench data before relying on it.
Try it now
The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.
Open CFD Lab Back to home