Image-to-Simulation VFX Pipeline
Turn an image or clip into a fluid simulation and export production VFX assets: OpenEXR float AOVs, sprite sheets, MP4/WebM and ParaView VTI. Runs in your browser.
StudioFX inverts the usual VFX pipeline. Instead of starting from a mesh and a material, you start from a plate — a still image or a short clip — and the tool infers a scalar field from it, advects that field through a fluid solver, and renders the result back to a production-ready asset. It is the same browser GPU stack as the CFD modules, pointed at a creative rather than engineering problem.
The field inference reads the image directly: luminance becomes density, a red-minus-blue chromatic bias becomes temperature, and a Sobel-gradient mask becomes the obstacle field. Velocity is inferred from the density gradient and then overridden wherever you paint directional wind strokes, so the artist keeps control of the parts that matter and the solver does the rest.
Two solvers sit underneath. The Motion Picture path is a 2D/2.5D projection fluid on a 320x180 lattice that runs at 512 resolution on WebGPU. The Fluid 3D path is a genuine D3Q19 lattice-Boltzmann volume at 48x32x24 with a Boussinesq buoyancy term, available at 64x48x32, so smoke genuinely rises because the solver says so rather than because it was keyframed.
The export side is what separates this from a toy. It writes PNG frame sequences with a manifest and SHA-256 checksums, OpenEXR scanline float32 uncompressed AOVs, sprite sheets with flipbook metadata, OpenTimelineIO, and video muxed through WebCodecs with codec probing across H.264, VP9, VP8, AV1 and HEVC. It also writes ParaView .vti and VTK volume data, so a shot can leave the browser and be picked up in a real pipeline. Ten AOV channels are available, including velocity, pressure, divergence, mist and depth.
One caveat stated plainly: these are creative previews, not validated engineering results. The smoke plume preset advects painted mist on the 2D path, and no preset here is combustion chemistry or a validated fire simulation.
Frequently asked questions
What can StudioFX export?
PNG frame sequences with a manifest and checksums, OpenEXR float32 AOVs, sprite sheets with flipbook metadata, OpenTimelineIO, MP4/WebM muxed through WebCodecs, and ParaView .vti plus VTK volume files. Ten AOV channels are available.
Is the 3D fluid a real solver?
Yes — the Fluid 3D path is a D3Q19 lattice-Boltzmann volume with a Boussinesq buoyancy term, running at 48x32x24 or 64x48x32. The distinction is that the shipped presets exercise the 2D Motion Picture path, not the 3D volume.
Can I use this for engineering analysis?
No. The module is positioned as previs for visual effects, and the interface says so. For engineering-grade flow use the validated solver modules and the benchmark catalogue instead.
Try it now
The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.
Open CFD Lab Back to home