Bioenergy & Pyrolysis Simulator — Thermo Balances

Model pyrolysis kilns, gasifiers and biochar in your browser: reacting porous-bed CFD with devolatilisation, Darcy-Forchheimer flow, discrete-ordinates radiation and equilibrium gasification.

Converting biomass into fuel is a coupled problem: a solid bed dries, devolatilises and chars while gas flows through it under its own pressure gradient, radiation penetrates the pores, and the chemistry moves the temperature. CFD Lab models that chain directly rather than approximating it with a single lumped reaction.

The reacting porous bed couples solid-phase drying, devolatilisation, char conversion and porosity evolution with Kozeny-Carman permeability, Wakao-Kaguei interphase heat transfer, and Darcy-Forchheimer flow in the bed driven by both the injected gas and the natural chimney draft. Eight gas species are transported with Westbrook-Dryer oxidation chemistry, radiation is handled with three-dimensional discrete ordinates, and the energy equation is two-temperature so the gas and solid can genuinely be at different temperatures. The mass and energy balances are closed and audited rather than assumed.

Gasification is solved as a real equilibrium problem. The water-gas-shift reaction is iterated to convergence and the resulting syngas composition gives you the lower and higher heating values, the hydrogen-to-carbon monoxide ratio, cold gas efficiency and tar content. Worth knowing where the boundaries are: cold-gas efficiency and methane yield are empirical correlations rather than solved quantities, and tar is a lookup by reactor type, so the equilibrium result is the trustworthy part of the answer.

The biocarbon tab implements the accounting gates that carbon-removal credits actually turn on — the European Biochar Certificate, Puro.earth and Verra VM0044 — including the organic-carbon, hydrogen-to-carbon and ash thresholds that decide eligibility, and the permanence factors that convert a measured carbon content into a 100-year and 1000-year credit using the Budai relationship. Treat the reactor viewport as a schematic: it is an illustration of the bed state, not a field render.

Frequently asked questions

Is the pyrolysis model validated CFD or an illustration?

The underlying thermodynamics is real and citable — reacting porous-bed transport, discrete-ordinates radiation and an iterated water-gas-shift equilibrium. But the grid the interface runs is small and the cold-gas efficiency and tar figures come from empirical correlations, so read the result as a design study rather than a certified plant design.

What makes biochar eligible for a carbon removal credit?

The standards gate on organic carbon content of at least 50 percent, a hydrogen-to-organic-carbon ratio at or below 0.70, an oxygen-to-organic-carbon ratio at or below 0.40, and ash below 25 percent. Permanence is then derived from the hydrogen-to-carbon ratio over 100 and 1000 years.

Try it now

The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.

Open CFD Lab Back to home