WiFi Sensing & CSI Signal Analysis
WiFi channel-state signal processing in your browser: FFT, Lomb-Scargle and MUSIC estimation, DTW, occupancy and presence sensing, plus log-distance RF propagation modelling.
WiFi sensing works because the channel state information a receiver already logs changes when something in the room moves. That turns commodity access points into a sensing instrument with no new hardware. The hard part is signal processing, and that is what this module is actually about.
The DSP is implemented from scratch on typed float arrays rather than delegated to a library: Butterworth IIR filtering, a Cooley-Tukey fast Fourier transform, and dynamic time warping for gesture and activity templates. On the spectral side it provides interpolated FFT, Lomb-Scargle for unevenly sampled data, and MUSIC for high-resolution estimation — which matters when several people occupy a room and the naive spectrum cannot separate them.
Alongside the signal chain sits an RF propagation model using log-distance path loss with per-material wall attenuation across nine wall materials in the 2.4, 5 and 6 GHz bands, which is what the architecture and medical panels use to reason about where access points should go.
Be clear about what a browser can and cannot show you. Live channel-state capture is supported over a real transport with reconnect backoff, but until live frames arrive the vital-signs view seeds a simulated link, and several panels are explicitly labelled as sample data. The module is honest about a limitation worth knowing: single-antenna respiration estimates are indicative only, which is why a second receive antenna matters. Nothing here is a medical device and none of it is diagnostic.
Frequently asked questions
Can it detect breathing and heart rate?
The signal processing to attempt it is present, but single-antenna respiration estimates are indicative only. The documented guidance is that a second receive antenna is needed to enable the ratio method the accuracy figures are based on. Treat any vitals output as research, not measurement.
Is any of this a medical device?
No. The medical panel carries an explicit notice that it is not a certified medical device and is for research and supplementary analysis only.
Try it now
The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.
Open CFD Lab Back to home