Turbomachinery Design — Pump & Compressor Sizing

Design centrifugal pumps, compressors and turbines in your browser: meanline stage design, impeller sizing, head and efficiency maps, affinity laws and system matching.

A turbomachine is a stack of stages, and each stage does a small, well-understood job. Design it from the meanline outward: pick a flow coefficient and stage loading, and the blade geometry — blade count, hub and tip diameters, mean-line chord, blade angles — follows from a small number of governing equations applied stage by stage.

CFD Lab implements that chain for centrifugal and mixed-flow machines. Given a target head or pressure ratio and a design flow, the stage designer solves the Euler turbomachinery equation for work input, distributes the loading across stages to respect stall and surge limits, and sizes the impeller. Because the machine is a stack rather than a lumped model, you see where the design is actually constrained instead of one aggregate number.

Maps are where a turbomachine becomes useful. A pump or compressor map gives head, efficiency and power against flow, and the operating point is set by where the machine characteristic intersects the system characteristic. That is a coupled, non-linear problem, and CFD Lab solves it directly so you can see the stability margin rather than assuming the machine sits where you hoped.

Affinity laws give the scaling answer once you have a map: changing speed scales flow as N, head as N², and power as N³. Deriving those relationships from the governing equations rather than quoting them keeps the scaling consistent with whatever field the solver actually produced.

Frequently asked questions

What is a mean-line design?

The mean-line is the streamwise path through the blade row at mid-span. Designing on it, using the Euler work equation and stage loading correlations, determines the geometry that then sets the 3D flow. It is the standard first iteration for any turbomachine.

How do I find the operating point of a pump?

Intersect the machine characteristic (head against flow at a given speed) with the system characteristic (the pressure the system demands at that flow). CFD Lab solves that intersection numerically and reports the operating point together with the distance to the surge and stall lines.

Can I model compressible stages?

Yes. The meanline and stage stack handle compressible flow with real gas properties, which is what you need for gas-turbine compressor and turbine rows. For those applications the ARP-755A cycle solver is the natural entry point.

Try it now

The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.

Open CFD Lab Back to home