Wind Turbine Analysis — BEM, AEP & Wake Models
Analyse horizontal-axis wind turbines in your browser: blade element momentum theory, Weibull annual energy production, IEC wind classes, power curves and wake loss models.
A wind turbine converts the kinetic energy in a moving air mass into electricity, and the first question is not aerodynamics but how much wind there is and how often. BEM theory gives the first cut; the wind resource gives the annual number that actually matters.
Blade element momentum theory splits the problem into a one-dimensional momentum balance and local blade-element aerodynamics: at each radial station, the blade lift and drag determine an induction factor that fixes the local axial force, while a structural limit constrains the angle of attack. The result is a thrust and power curve for a given rotor diameter and rated wind speed, and a spanwise distribution of loading a structural engineer can use.
Annual energy production needs a wind speed distribution, and the Weibull is the standard one — two parameters, a scale and a shape, fitted to the site. Multiply the power curve by the probability of each wind speed and integrate, and you get AEP, gross and net of losses. Because the Weibull shape parameter changes the answer, quoting AEP without it is meaningless: the same annual mean wind speed with a different k gives a materially different yield.
CFD Lab adds the IEC 61400 wind classes, so a rotor can be checked against a class rather than against an assumption, and wake models for layout analysis when turbines are in a row. Farm-level wake loss is where a good single-turbine estimate most often fails, and modelling it explicitly is cheaper than discovering it in production.
Frequently asked questions
What is blade element momentum theory?
An aerodynamic model that treats each blade spanwise station as a 2D airfoil while enforcing a global momentum balance on the rotor. It gives thrust, power and spanwise loading without solving the full 3D flow, which is why it is the standard first-pass method for rotor design.
How do I calculate AEP?
Fit a Weibull distribution to the site wind data, then integrate the power curve against the probability of each wind speed, weighting by air density. Report the Weibull k with the result — a different shape parameter changes the yield even at identical mean wind speed.
Try it now
The page you are reading is a static, crawler-readable summary. The interactive tool runs in your browser — nothing is uploaded.
Open CFD Lab Back to home